Weed barrier staples:
6″ and 8″, 1″ or 2″ crown.
Medium load — fabric under tension, wind at the edges, moisture underneath.
A fabric edge fails at the crown first: a 1″ crown cuts through, a 2″ crown spreads the pull. Match crown to the material edge, legs to the soil, and galvanise whatever stays under the fabric.
The fabric fails where the staple is too narrow.
Weed barrier is a tension membrane. Load arrives at the pin, not evenly across the roll — so the crown, not the wire, is the first decision.
Crown width beats gauge
A wide crown spreads the pull over more fabric. 9 gauge on a 2″ crown usually outlasts 8 gauge on a 1″ crown at a free edge.
Legs for graded ground
Fabric is laid on graded, uncompacted soil. Six inches pulls out of that; eight reaches something solid.
Galvanised under fabric
Fabric keeps the ground damp and dark. Bright wire pits in a season there; zinc is what keeps the staple whole.
To quote this job
- Fabric width and edge condition
- Legs 6″ or 8″, crown 1″ or 2″
- Soil type — sand, loam, fill
- Barbed or plain legs
- Boxes per pallet target
- Port and Incoterm
The weed-barrier list.
One-inch crowns for tape and normal soil; two-inch crowns wherever the fabric edge is exposed or the staple sits in fill.
| Size | Wire | Top | Pcs / box | Note |
|---|---|---|---|---|
| 6″ × 1″ × 6″ | 11 ga | Square | 1,000 | Galvanised. Fabric in normal, compacted soil. |
| 6″ × 2″ × 6″ | 9 ga | Square | 1,000 | 2″ crown across wide fabric edges, seams and hard edges. |
| 8″ × 1″ × 8″ | 11 ga | Square | 500 | Graded or loose fill where 6″ pulls out. |
| 8″ × 1″ × 8″ | 8 ga | Square | 500 | Heavy traffic, coarse aggregate base. |
| 6″ × 1″ × 6″ barbed | 9 ga | Square | quote | Two to four barbs per leg, formed to order. |
Fabric tearing at the pins?
Send the fabric width, the soil type and the exposed edge length. We size the crown and legs against it.