Stainless staples:
304 and 316, 6″–10″.
Where the zinc goes first: salt spray, brackish water, fertigation lines.
A galvanised staple is a wear item on a coastal site — the zinc is consumed and the wire starts. Stainless removes the coating question: 304 for wet ground, 316 where chlorides rule.
On a salt site, a coated staple is a consumable.
Corrosion is a rate, not a state: the question is how many seasons the staple lasts before the wire under the coating starts to go.
Where zinc goes first
Galvanising is a sacrificial layer: in chloride and constant wet, the zinc is consumed and the steel starts. Stainless has no coating to lose.
Wet ground, fresh water
304 handles irrigation, wetland and constant moisture. The usual choice for fertigation and hose lines.
Salt in the air or the soil
316 adds molybdenum, which is what holds up in coastal spray, brackish water and chloride-rich ground.
To quote stainless
- Alloy: 304 or 316
- Legs and crown, inches
- Top shape
- Quantity in pieces or boxes
- Site conditions — salt, brackish, fertiliser
- Port and Incoterm
The stainless list.
Same tooling as the carbon line. Only the wire changes — and the price, which follows the alloy and the tonnage.
| Size | Wire | Top | Pcs / box | Note |
|---|---|---|---|---|
| 6″ × 1″ × 6″ | 304 | Square | quote | Wet soil, fresh water, fertigation — the default stainless size. |
| 8″ × 1″ × 8″ | 304 | Square | quote | Softer ground, longer service interval. |
| 10″ × 1″ × 10″ | 304 | Square | quote | Netting and fabric on wet sites. |
| 6″ × 1″ × 6″ | 316 | Square | quote | Coastal salt spray, brackish water, chloride-rich soil. |
| 6″ × 1″ × 6″ | 316 | Round | quote | Salt-water drip and hose lines. |
Other applications
Replacing galvanised pins every season?
Send the site conditions and the annual quantity. We quote 304 or 316 against the wire price, with the size you already use.