YIXUN STAPLESANPING · HEBEI · CHINA
Home/Applications/Shade net & bird netting staples
Application 03 — shade net · wind load

Shade net staples:
8″–12″, 8–9 gauge.

Wind load — a net turns a gust into a pull on every staple.

Netting is a sail. The staple has to hold tension, not just the fabric weight: twice the steel of 11 gauge, legs below the tilled layer, and a 2″ crown so the pull spreads across the weave instead of tearing one hole.

Carton250 / 500by leg length
Pallet72 boxes6 layers × 12
20′ container16–17 pallets1,152–1,224 boxes
Wire8–9 gaØ 4.2 / 3.8 mm
2″ 12″ wind net / shade cloth 8 gauge · 2″ crown · barbed or screw to order FIG. 03 — WIND LOAD 8 GA · 12″ × 2″ × 12″
Heavy staple holding shade netting — 8 ga, 12″ legs, 2″ crownschematic
Wind load2″ crown8–9 gaugeBarbed / screw option72 boxes per pallet
Why this staple

A net is a sail, and the staple is the whole anchor.

Everything that fails under netting fails at the same place: the leg pulls out of loose ground, or the crown tears through the weave.

2.25×

Steel per staple, versus 11 ga

Wire area rises with the square of the diameter: 8 gauge (Ø 4.2 mm) carries 2.25× the steel of 11 gauge (Ø 2.8 mm) at the same length.

12″

Legs under the tilled layer

Wind anchors let go in the loose top 4–6″. Ten to twelve inch legs reach ground that has not been worked.

2″

Crown across the weave

A wide crown bridges several strands, so the gust arrives on the staple instead of on one torn hole in the net.

To quote this job

  • Net type, width and span between posts
  • Legs 8″, 10″ or 12″, crown 2″
  • Gauge 8 or 9
  • Barbed, screw or plain shank
  • Volume and season
  • Port and Incoterm
Sizes for this job

The netting list.

Long legs first, then the crown, then the shank. On a windy site the order never changes.

Shade net and bird netting staples
SizeWireTopPcs / boxNote
10″ × 2″ × 10″8 gaSquare500Wind-exposed runs with shade cloth or bird net, 2″ crown.
12″ × 2″ × 12″8 gaSquare250Long spans and sandy ground; the leg that stays put.
12″ × 1″ × 12″8 gaSquare250Narrow edges and heavy section of net.
8″ × 2″ × 8″9 gaSquare500Sheltered sites, hand install, price-sensitive.
10″ × 2″ × 10″ screw8 gaSquarequoteThreaded shank in sand or ash; formed to order.
Main wind-load size Screw and barbed shanks are custom formed; carton counts confirmed per order.

Nets lifting at the corners?

Tell us the span, the wind exposure and the ground. We size the leg and the crown for the load, not for the price.