YIXUN STAPLESANPING · HEBEI · CHINA
Dripline staples · sod staples · irrigation staples

Dripline staples,
11 gauge, 6″ × 1″ × 6″.

The size we ship to the USA and Canada by the pallet and the container.

72 boxes on a pallet. 16–17 pallets in a 20′. Lengths 4″–12″, crown 1″ or 2″, wire 8–11 gauge, bright or galvanized — and custom sizes when your installer asks for something else.

Carton1,000 pcs11 ga · ≈ 35 lb
Pallet72 boxes6 layers × 12, wrapped
20′ container16–17 pallets1,152–1,224 boxes
Size range4″–12″1″ / 2″ crown · 8–11 ga
1″ 6″ leg Ø 2.8 mm 11 gauge 45° bevel chisel point
Square top · 11 ga · 6″ × 1″ × 6″front elevation
1″ or 2″ crown width 45° bevel tip Square / round top Bright or galvanized wire Custom sizes accepted FOB Tianjin · CIF · DDP
01 — The staple

A U of steel wire, bent to hold a line down in the dirt.

Two legs, one crown, two bevel-cut tips. The crown is what holds the material; the legs are what hold the ground. Change the crown shape and you change what the staple can grip — that is the whole engineering of the product.

crown 1″ saddles the tape leg 6″ bevel tip drip tape O.D. up to 7/8″ soil line
Round-top staple over drip tapesection
Square topSod, fabric, blanket. The flat crown sits under the material.
Round topDrip tubing, soaker hose, PVC. Curved crown, no kink in the line.
Circle topFast install, hook-friendly. 6″–8″ in 8–11 gauge.

What decides whether it holds

Leg length sets depth: 4″ for blankets and fabric, 6″ as the working norm in turf and orchards, 8″–12″ where soil is loose, slope is steep, or wind load is high.

Crown width sets what you can straddle: 1″ over drip tape, hose and wire; 2″ across the edge of wide fabric and netting.

Wire gauge sets the load: 11 gauge (Ø 2.8 mm) pushes in by hand or boot heel; 8 gauge (Ø 4.2 mm) survives hard ground and equipment traffic.

Tip: both legs get a 45° bevel, so they cut into fabric and mat instead of tearing it.

Which top: U top for drip tubing and hose, flat top for sod, fabric and blanket. The two photographs below are the same wire, one crown each.

Three round-top staples with 45 degree bevel-cut legs, bright wire, on a workbench
U top — round crown Fixed over drip tubing and hose. The curve carries the line, so the tube runs under the crown without a kink at every staple. as formed · 11 gauge · 45° bevel
Two flat-top galvanised staples with square crown, straight and splayed legs
Flat top — square crown Fixed over sod, landscape fabric and erosion blanket. A flush crown presses the sheet edge flat instead of riding up on it. galvanised · 9–11 gauge · 1″ / 2″
02 — Specifications

The size list, written the way a purchasing sheet reads.

Size is always quoted as leg × crown × leg, in inches. Tell us the combination and the packing, and you get a quote against it — not a catalogue number.

Standard sizes — leg × crown × leg, inches. Carton counts shown are our standard program values.
SizeWireTopPcs / boxWhere it goes
6″ × 1″ × 6″ Main 11 gaSquare1,000 Our standing US / Canada export size. 72 boxes per pallet, 16–17 pallets per 20′.
6″ × 1″ × 6″11 gaRound1,000 Drip tape, soaker hose, irrigation line. Curved crown holds the tube without crushing it.
4″ × 1″ × 4″11 gaSquare1,000 Light fabric, frost blanket, netting, decoration — shallow soil, fast install.
8″ × 1″ × 8″11 gaSquare500 Loose or sandy soil, fabric on slope, taller vegetation cover.
8″ × 1″ × 8″8 gaSquare500 Heavy-duty turf and mat work where 11 gauge bends.
6″ × 2″ × 6″9 gaSquare500 2″ crown across wide fabric edges and blanket seams.
10″ × 1″ × 10″11 gaSquare500 Soft ground, high wind, netting and shade cloth.
12″ × 1″ × 12″8 gaSquare250 Erosion blanket on steep faces, embankment and channel work.
Wire gauge → nominal diameter
GaugeDiameterBehaviour
11 ga≈ 2.8 mmLightest. Hand or boot install; fabric, drip tape, sod.
10 ga≈ 3.4 mmMiddle weight. Where 11 ga bends but 9 ga is overkill.
9 ga≈ 3.8 mmHeavy landscaping, compacted soil, slope work.
8 ga≈ 4.2 mmHeaviest. 8″–12″ legs, hard ground, machine traffic.
Run standard Main export size Diameters are nominal; the actual wire is stated on your packing list.

What a gauge step really costs

Wire area scales with the square of the diameter, so 11 → 10 ga is 1.47× the steel per staple, 11 → 9 ga 1.84×, 11 → 8 ga 2.25×. Weight and price move together; longer legs add on top, in proportion.

Length × crown × gauge — the matrix we run

A dot means we run it as standard. Columns read crown width / wire gauge. Anything inside 4″–12″ legs, 1″ or 2″ crown and 8–11 gauge can also be made to order, including lengths, crown widths and top shapes outside this grid.

Legs1″/111″/101″/91″/82″/112″/92″/8
4″
6″
8″
9″
10″
12″

Outside the grid?

7″ or 11″ legs, 1.5″ crown, T-top, G-shape, washer pins, PVC-coated wire, stainless — made to drawing. Send the dimensions and the volume; we quote a run against them.

Send custom dimensions

Finish

Bright wire — bare, uncoated. Grips harder as it oxidises; lowest cost per piece.

Galvanised — zinc-coated for coastal sites, wetland and long service. Coating weight reported with the lot.

Top shape

Square crowns hold fabric, blanket and sod flat. Round crowns saddle drip tape and hose without kinking it.

Circle tops install fast and hook nothing. T-top, G-shape and washer pins made to drawing.

Inside the box

1,000 pcs for 6″ 11 ga, 500 pcs for 8″–10″, 250 pcs for 12″ 8 ga.

Bags, small retail packs and private labels on request. 72 boxes to a pallet as standard.

03 — Packing & container load

72 boxes a pallet. 16 to 17 pallets a 20′. The freight maths is the quote.

Most suppliers quote a price per piece. We quote the boxes, the pallet and the container, because that is what you actually pay freight on. Double-stacked pallets, counted and weighed before the doors close.

1,000 staples ≈ 35 lb
Carton1,000 staples, 11 ga 6″×1″×6″, ≈ 35 lb / 15.9 kg net.
6 layers × 12 = 72 boxes
Pallet72 boxes stacked and wrapped, one label, one count.
2 tiers · 16–17 pallets · 20′
ContainerPallets double-stacked; load plan drawn to your door height.
Boxes per pallet72counted, weighed, wrapped
Pallets per 20′16 – 17double-stacked
Boxes per 20′1,152 – 1,22472 × 16 / 72 × 17
Pieces per 20′1.15 – 1.22 Mat 1,000 pcs per box
Kraft carton opened to show 50 galvanised staples packed in one layer
50 pcs box Kraft box, 50 staples. The unit that goes on a counter or in a truck box — open it and count. 50 pcs · kraft box
Open carton lined with a poly bag holding 1,000 galvanised staples
1,000 pcs carton Poly-lined carton, 1,000 staples, ≈ 35 lb net at 11 ga 6″×1″×6″. The box our pallet and container counts are built on. 1,000 pcs · poly-lined carton
Poly bag of 50 galvanised staples standing on a carton
50 pcs poly bag Plain poly bag, 50 staples. Samples, refills at the trade counter, one-man jobs. 50 pcs · poly bag

Weight at 1,000 pcs per box: 18.3–19.5 t per 20′ for the 11 ga 6″×1″×6″ program. Mixed sizes and mixed gauges are palletised to your ratio; 40′ plans and LCL cartons on request. Every pallet ships with a packing list showing size, gauge, top, pieces and net weight.

04 — Applications

Pick the staple by load, not by habit.

Same wire, different job. Under a drip tape in an orchard the staple only has to stop the tape lifting; on an embankment it has to hold a blanket through a storm. Below is how we pair the job with the size.

Application → recommended staple
JobLoadStapleTop
Drip tape / dripline, orchard and row cropLight11 ga 6″×1″×6″Round
Drip tape on slope, or open windy fieldMedium11 ga 8″×1″×8″Round
Weed barrier / landscape fabricLight–med11 ga 6″×1″×6″Square
Fabric edge, wide roll, blanket seamMedium9 ga 6″×2″×6″Square
Sod and turf establishmentMedium11 ga 6″×1″×6″Square
Erosion blanket, jute / burlap nettingMed–heavy9 ga 6″×1″×6″Square
Steep face, channel, embankmentHeavy8 ga 12″×1″×12″Square
Shade cloth, bird netting, frost blanketWind8 ga 10″×2″×10″Square
Pet fence wire, lighting cableLight11 ga 6″×1″×6″Round
Coastal, wetland, high humidityCorrosion9 ga galvanizedRound / square
05 — Factory

Anping, Hebei — the county that draws the wire.

Yixun Staples Co., Ltd. forms and packs staples on Zheng Rao Road North, Anping — the wire mesh base of China, where rod, drawing and galvanising sit within a few kilometres of the shop floor.

01

Wire rod

Low-carbon rod, drawn to the gauge on your order.

02

Draw

Ø 2.8–4.2 mm, bright or hot-dip galvanised.

03

Cut & form

Legs cut to length, crown bent square or round, 45° bevel on both tips.

04

Check

Crown width, leg length, bevel, wire diameter — sample checked per lot.

05

Pack

Counted into cartons, weighed, palletised 72 boxes, wrapped.

06

Load

Double-stacked, sealed, documents on the pallet.

72

Boxes on a pallet, every pallet

The count is fixed so your landed cost per staple is fixed. Short pallets cost you a container slot.

16–17

Pallets in a 20′

Double-stacked load plan; 1,152–1,224 boxes per container, stated before booking.

4″–12″

Any leg length in range

Crown 1″ or 2″, wire 8–11 gauge, square, round or circle top. Outside the range on request.

FOB

Tianjin · CIF · DDP

Quoted FOB Xingang by default; CIF to your port or DDP to your yard on request.

4

Documents with every lot

Invoice, packing list, certificate of origin, wire and coating report.

Anping

Wire from within the county

Rod, drawing and galvanising sourced locally, so repeat sizes move fast.

06 — Custom shapes

Bends that are not in any catalogue.

Two shapes ship on customer drawings: a shoulder pressed into both legs, and a J staple with one long leg and one short hook. Neither is a stock item, so each is quoted per shape — tooling, minimum quantity and first-article date come back with the price.

Galvanised U staple with a stepped shoulder pressed into both legs
Shoulder, both legs A step pressed into each leg above the hose line — the Rain Bird pattern. We form it to the step depth, the leg length and the height above the tip that your drawing gives. made to order · drawing → sample → price
Carton of J-shaped galvanised staples, one long leg and one short hooked leg
J staple One long leg, one short leg turned through the hook angle you set. Same wire as the standard U, formed and packed to the count on the order. made to order · leg split and hook angle to drawing

Send a drawing, a sample or a photo with three numbers — wire gauge, leg lengths, crown or hook width — and the answer comes back as a formed price with tooling cost and the first-article date. Square, round and circle tops already have tooling; the two above do not.

Send a drawing
07 — Quote

Give us six numbers, get a freight-ready price.

Fill the form and it opens a mail draft with your spec in the subject line. Or send the same list on WhatsApp — either reaches the same desk.

Opens your mail client with the enquiry filled in.

Or straight to the desk

Email
info@driplinestaples.cn
WhatsApp
+86 159 3138 5570
Company
Yixun Staples Co., Ltd.
Address
North Side of Zheng Rao Road,
Anping, Hebei, China

What we need to quote

  • Size, leg × crown × leg
  • Wire gauge and finish
  • Top: square, round or circle
  • Pieces per box, boxes per pallet
  • Volume per shipment
  • Port and Incoterm